FLOAT SPA PREMIUM FLOATING ROOM SYSTEM - TECHNICAL DETAILS TARIC/CUSTOMS CODE: 9019-200000 WWW.FLOATSPA.COM
THE FLOAT SPA PREMIUM FLOATING SESSION EXPERIENCE:
The float session happens in the pool of the Float Spa Premium Room System on the surface of body-warm (appr. 1 500- 1 600 litres) water including appr. 30% MgSO4 (400-650 kg food quality Epsom salt). The float room can fit even 2 people. You can choose from 30, 60, 90, 120 or 180 minutes long float session on the touch screen display. You can set different light and colour programs (various colour programs or floating without lights), aromatherapy, music on or off (silent floating, continuous music, custom music, external music source) or just simply enjoy our default session. The pool is empty when you step into the room, then it is filling up in front of you with freshly regenerated (4+1 steps water cleaning system) salty water. It takes 8-12 minutes, so meanwhile you can take a shower. Then the system plays a welcome speech informing you, the float session starts and the length of the session. Then please step inside to the pool, lay down and relax, let yourself go. In the default Float Spa Premium float program you enjoy a few minutes (appr. 5 minutes) session with sound and light therapy (aromatherapy is OFF by default) then the music and lights fades away. The middle of the session is the sensory deprivation phase when there is no light and sound, just a peaceful, protected, safe, body warm floatation experience. In the last appr. 5 minutes the music and light is gently coming back, the wakening phase starts. Then a good-bye speech is played and the system automatically empties the pool, by pumping out the water through the 4 steps water cleaning system. It takes appr. 8-12 minutes, so you can have a shower again to rinse the salt from your body. Then the float pool is cleaned (Back-wash system is included for Float Room), sprayed with disinfectant liquid and rinsed with fresh water from the faucet/shower/hosepipe next to the pool. The used salty water is cleaned and treated before and after every floating session in 4 different ways (I. acrylic super fine paper filter, II. glass-sand (green glass) filter, III. UV disinfection lamp, IV. chemical injection (H2O2 or chlorine) + V. periodically an active coal (carbon) filter is installed). If there is no floating session, the system cleans and circulates the water in the technical room every 2nd hour automatically. The whole amount of salt water needs to be changed yearly or after every appr. 500-1 000 floating sessions (depends on the local regulations, the quality and the optical parameters of the water). Water depth: 36-38 cm (14''-15'').
THE FLOAT SPA PREMIUM FLOATING ROOM SYSTEM CONTAINS:
Float room open pool (white colour), LCD touch screen display, 2 water reservoir tanks, technical unit with pump and filters, control box with switches and fuses, detailed user's manual in English with photos, 450 kg food quality MgSO4 (Epsom salt), hydrometer, 2 head rests, pipes for the installation, etc. Walls of the float room pool are not included.
Extra set of filters (contains 1 paper filter, 1 sand filter, 1 active carbon filter). Central Control System to control multiply Float Spa floating units from a bigger screen from the reception desk. Precision H2O2 reader to measure the H2O2 level precisely and accurately in the salty water. +1 extra in-light ON-OFF inside light switch is OPTIONAL.
SOUND- LIGHT- AND AROMATHERAPY:
Underwater speaker, pre-programmed 14 relaxation music tracks, +10 custom music tracks of your own choice and external AUX music connection. 60 underwater multicolour-, programmable LED lights. Changeable aroma sponge (aroma oil is not included).
60 pieces LED lights under the water level, 12 variety of colours, 1 in-light safety (panic) button. +1 extra in-light ON-OFF inside light switch is OPTIONAL.
Sanitary pool body material.
Outside/inside Length: 2 500 / 2 340 mm, Width: 2 000 / 1 840 mm, Height: 700 mm. The pool can fit 2 people. Water depth: 36-38 cm (14''-15'').
Energy efficient insulated, totally silent heaters. The pool body and the 2 water preparation tanks are heated silently also. The water is always ready for floating. During the float session the silent heating of the pool body is ON and OFF - keeping the right water temperature during the whole floating seesion without any bothering noise.
LCD touch screen display, fitted in the pool's room, built in memory floating encounter. Water temperature set up, water cleaning system parameters, light, aroma and sound control. Remote software access via internet to technicians. Optional Central Control System to control multiply Float Spa floating units from one bigger display from the reception desk is available.
The empty weight of the room is appr. 150 kg. The room weight filled with the full amount of water and MgSO4 included two people is appr. 2 150 kg. Water treatment tank weight empty: 100 kg /pc (2 pcs you have), filled full with water appr. 1 000 kg / pc (2 pcs you have) on a diameter of 79 cm! Weight of the engineering/technical unit empty/full with water: 70/120 kg. Weight of the control box: appr. 20 kg.
Net/Gross weight is appr. 1 000 / 1 100 kg / float tank unit when it is wrapped in foil on 5 palettes. Foil packaging is for free. Minimum 350 cm long, 185 cm wide and 220 cm!!! high truck loading space (and wide doors) needed in case of foil packaging. Net/Gross weight is appr. 1 000 /1 400 kg / float tank unit when it is packaged into 5 special fumigated wooden crates for oversea deliveries (cost net + 1 150 Euro/float tank). 5 boxes/crates (width x depth x height in cm): I. pool 260x210x98 cm appr. 400 kg, II. water tank (1st) 100x100x232 cm appr. 160 kg, III. water tank (2nd) 100x100x232 cm appr. 160 kg, IV. technical unit 132x117x150 cm appr. 120 kg, V. accessories 110x102x108 cm appr. 560 kg, it is included the palettes under them. So they can be lifted with forklift machine with 220 cm long forks. A 20 feet container can fit 2 units, a 40 feet container (better the higher version, HC container) can fit 4 units. TARIC/CUSTOMS CODE: 9019-200000
INSTALLATION SPACE REQUIREMENTS:
The ideal space requirement when the pool, a double shower, and the technical unit is placed in the same room: 425 cm wide x 370 cm long x 230 cm high (appr. 17 sqm) room. The ideal sizes when the treatment room and the technical room is separated: Technical room 120 cm wide x 350 cm long x 230 cm high (appr. 4 sqm). Treatment room with double shower: 275 cm wide x 370 cm long x 230 cm high (appr. 10 sqm). For the delivery and installation a size of minimum 80 cm wide (90 cm wide is better) x 205 cm high free doorway is needed with a sufficient corridor size and height. Sound- and light insulation of the treatment room is needed.
LAYOUTS / DESIGN / PLANS:
Float Spa Kft. is supervising all the plans of the treatment and technical room. The system does not create any noise during the float session. The technical unit and the water reservoir tanks can be placed in the same room with the pool or in a different room. The technical room can be even in a lower floor level than the pool. Maximal horizontal pipe length 10 m. Shorter piping is better. Vertical piping height less than 3 m, otherwise stronger pump surcharge applied. Please consult with Float Spa Kft.
1 IP67 protected socket in the technical room 110V (US) /230V (EU), 1 phase, grounded. Wire: 3x2,5 mm. Fuse: 16 A, C characteristic. Electric consumption: max. 2,5 kW/hour. Yearly electric consumption appr. appr. 4 400 - 7 300 kW/year / float room. The units are produced in CE and in US/Canadian versions. Public use US/Canadian versions are inspected and approved by the company QPS/UL.
WATER AND DRAIN CONNECTION:
It is required to build floor drain under the pool and in the technical room too. In the cabin's room, you may need to build a shower and hand washing basin with hot and cold water. For the Back-wash system a socketed floor drain is needed near the pool.
It is recommended to install silent air ventilation (approx. 50 qm/h) and suction in the room of the cabin and in the technical room also. It is against the damp and heat.
SOUND AND LIGHT INSULATION:
In order to get maximum floating experience the sound (sidewalls, floor, ceiling, doors, and windows) and light isolation is important.
More detailed information in the installation description. We keep the right of mistyping and changing technical solutions. All rights reserved. Float Spa Kft. 2020.