FLOAT SPA PREMIUM FLOATING TANK SYSTEM - TECHNICAL DETAILS TARIC/CUSTOMS CODE: 9019-200000 WWW.FLOATSPA.COM | |
THE FLOAT SPA PREMIUM FLOATING SESSION EXPERIENCE: | The float session happens in the Float Spa Premium floating cabin/tank/pod on the surface of body-warm (appr. 750-800 litres) water including appr. 30% MgSO4 (200-275 kg food quality Epsom salt). You can choose from 30, 60, 90, 120 or 180 minutes long float session on the touch screen display. You can set different light and colour programs (various colour programs or floating without lights), aromatherapy, music on or off (silent floating, continuous music, custom music, external music source) or just simply enjoy our default session. The pool is empty when you step into the room, then it is filling up in front of you with freshly regenerated (4+1 steps water cleaning system) salty water. It takes 6-8 minutes, so meanwhile you can take a shower. Then the system plays a welcome speech informing you, the float session starts and the length of the session. Then please step inside to the pod, (you can get the 3 grips), close the lid as much as you want, lay down and relax, let yourself go. In the default Float Spa Premium float program you enjoy a few minutes (appr. 5 minutes) session with sound and light therapy (aromatherapy is OFF by default) then the music and lights fades away. The middle of the session is the sensory deprivation phase when there is no light and sound, just a peaceful, protected, safe, body warm floatation experience. In the last appr. 5 minutes the music and light is gently coming back, the wakening phase starts. Then a good-bye speech is played and the system automatically empties the pool, by pumping out the water through the 4 steps water cleaning system. It takes appr. 6-8 minutes, so you can have a shower again to rinse the salt from your body. Then the float pool is cleaned (sprayed with disinfectant liquid) or - if you have the optional Back-wash system- sprayed with disinfectant liquid and rinsed with fresh water from the faucet/shower/hosepipe next to the pod. The used salty water is cleaned and treated before and after every floating session in 4 different ways (I. acrylic super fine paper filter, II. glass-sand (green glass) filter, III. UV disinfection lamp, IV. chemical injection (H2O2 or chlorine) + V. periodically an active coal (carbon) filter is installed). If there is no floating session, the system cleans and circulates the water in the technical room every 2nd hour automatically. The whole amount of salt water need to be changed yearly or after every appr. 500-1 000 floating sessions (depends on the quality and the optical parameters of the water). Water depth in the pod: 27-30 cm (10,6''-12'').
|
THE FLOAT SPA PREMIUM FLOATING TANK SYSTEM CONTAINS: | Cabin/float tank/pod (white colour), LCD touch screen display, water reservoir tank, technical unit with pump and filters, control box with switches and fuses, detailed user's manual in English with photos, 225 kg food quality MgSO4 (Epsom salt), hydrometer, head rest, pipes for the installation, etc. You can choose from short or long skirt version pods (no price difference): short skirt version needs a 24,5 cm (9,64'') high podium and have a low threshold of only 35-36,5 cm (1'2'') to step over. Long skirt version float pod does not need a podium, but have a bit higher (still low) front threshold of 61 cm (2 feet) to step over. For older customers the short skirt version may be easier to use, but the long skirt version is easier to install and reinstall/relocate and it needs less building cost, because you do not need to build a podium. The 61 cm (2 feet) front threshold is still very low in the industry. It is up to your decision which version and in what combination, you choose.
|
| Back-wash system for easy and quick pool cleaning by rinsing with a shower (shower and tap is not included). Extra set of filters (contains 1 paper filter, 1 sand filter, 1 active carbon filter). Central Control System to control multiply Float Spa floating units from a bigger screen from the reception desk. Precision H2O2 reader to measure the H2O2 level precisely and accurately in the salty water. +1 extra in-light ON-OFF inside light switch is OPTIONAL.
|
SOUND- LIGHT- AND AROMATHERAPY: | Underwater speaker, pre-programmed 14 relaxation music tracks, +10 custom music tracks of your own choice and external AUX music connection. 62 underwater multicolour-, programmable LED lights. Changeable aroma sponge (aroma oil is not included).
|
| 62 pieces LED lights under the water level, 12 variety of colours, 1 in-light safety (panic) button. +1 extra in-light ON-OFF inside light switch is OPTIONAL.
|
| Antibacterial sanitary acrylic vacuum formed pod body (for the best, smoothest surface for hygiene), with anti-slip step in area, 3 stainless steel inside grips, 1 internal in-light safety (panic) button. The cabin lid is fitted with top quality gas springs in order to hold and stop in any position. Stay in any position lid! You can leave the top lid open as much as you wish and it stays open in any position during your floating session - good for people with claustrophobia. Massive adjustable opening mechanism for the gas springs is fitted outside at the back of the pool.
|
| Outer/inner dimensions: Length: 2 500/2 320 mm, Width: 1 770/1 590 mm, Height (in closed position): 1 240 mm, Height (in maximal opened position): 2 200 mm. Water depth in the pod: 27-30 cm (10,6''-12'').
|
| Energy efficient insulated, totally silent heaters. The cabin/pod body and the water preparation tank is heated silently also. The water is always ready for floating. During the float session the silent heating of the pod body is ON and OFF - keeping the right water temperature during the whole floating seesion without any bothering noise.
|
| LCD touch screen display, fitted in the cabin's room, built in memory floating encounter. Water temperature set up, water cleaning system parameters, light, aroma and sound control. Remote software access via internet to technicians. Optional Central Control System to control multiply Float Spa floating units from one bigger display from the reception desk is available.
|
| The empty weight of the cabin is approx. 240 kg. The cabin weight filled with water and MgSO4 included one person is approx. 1 300 kg. Water treatment tank weight empty: 100 kg, filled full with water appr. 1 000 kg on a diameter of 79 cm! Weight of the engineering/technical unit empty/full with water: 70/120 kg. Weight of the control box: appr. 20 kg.
|
| Net/Gross weight is appr. 700/750 kg / float tank unit when it is wrapped in foil on 4 palettes. Foil packaging is for free. Minimum 350 cm long, 185 cm wide and 220 cm!!! high truck loading space (and wide doors) needed in case of foil packaging.
Net/Gross weight is appr. 700 /1 150 kg / float tank unit when it is packaged into 4 special fumigated wooden crates for oversea deliveries (cost net + 1 150 Euro/float tank). 4 boxes/crates (width x depth x height in cm): I. cabin 280x200x170 cm appr. 500 kg, II. water tank 100x100x232 cm appr. 160 kg, III. technical unit 132x117x150 cm appr. 120 kg, IV. accessories 110x102x108 cm appr. 350 kg, it is included the palettes under them. So they can be lifted with forklift machine with 220 cm long forks. A 20 feet container can fit 2 units, a 40 feet container (better the higher version, HC container) can fit 4 units. TARIC/CUSTOMS CODE: 9019-200000
|
INSTALLATION SPACE REQUIREMENTS: | The ideal space requirement when the pod, a shower, and the technical unit is placed in the same room: 450 cm wide x 380 cm long x 230 cm high (appr. 17 sqm) room. The ideal sizes when the treatment room and the technical room is separated: Technical room 120 cm wide x 220 cm long x 230 cm high (appr. 3 sqm). Treatment room with shower: 280 cm wide x 370 cm long x 230 cm high (appr. 10 sqm). For the delivery and installation a size of minimum 80 cm wide (90 cm wide is better) x 190/205 cm high free doorway is needed with a sufficient corridor size and height. Sound- and light insulation of the treatment room is needed.
|
LAYOUTS / DESIGN / PLANS: | Float Spa Kft. is supervising all the plans of the treatment and technical room. The system does not create any noise during the float session. The technical unit and the water reservoir tank can be placed in the same room with the cabin/pod or in a different room. The technical room can be even in a lower floor level than the pool. Maximal horizontal pipe length 10 m. Shorter piping is better. Vertical piping height less than 3 m, otherwise stronger pump surcharge applied. Please consult with Float Spa Kft.
|
PODIUM IN THE CABIN'S ROOM (only needed for short skirt pod version): | The wires and pipes go under the short skirt cabin so a podium is needed for this version. It can be a raised floor system, or a built version done by the contractor of the customer on the site. The podium is not included in the price. The built version: gross (tiled) height of the podium is 24,5 cm (made from concrete or XPS, and the top surface is tiled). Please pay attention to the weight of the whole construction. The cabin/pod is placed in the hole cut in the podium marked according to the sized inside-outside size models/templates provided by Float Spa Kft.
|
| 1 IP67 protected socket in the technical room 110V (US) /230V (EU), 1 phase, grounded. Wire: 3x2,5 mm. Fuse: 16 A, C characteristic. Electric consumption: max. 1,5 kW/hour. Yearly electric consumption appr. 3 176 kW / float tank / year. The units are produced in CE and in US/Canadian versions. Public use US/Canadian versions are inspected and approved by the company QPS/UL.
|
WATER AND DRAIN CONNECTION: | It is required to build floor drain under the cabin and in the technical room too. In the cabin's room, you may need to build a shower and hand washing basin with hot and cold water. For the optioanl Back-wash system a socketed floor drain is needed near the pool.
|
| It is recommended to install silent air ventilation (approx. 50 qm/h) and suction in the room of the cabin and in the technical room also. It is against the damp and heat.
|
SOUND AND LIGHT INSULATION: | In order to get maximum floating experience the sound (sidewalls, floor, ceiling, doors, and windows) and light isolation is important.
|
More detailed information in the installation description. We keep the right of mistyping and changing technical solutions. All rights reserved. Float Spa Kft. 2020. | |